User manual

4 MaxSupervisor Manual
3. Open the MaxSupervisor folder, and run the Setup program in that
folder, following the step-by-step installation instructions as they
appear on the screen.
4. Alternatively, if your system administrator has loaded MaxSupervisor
on a shared network server, you can copy the files in the
MaxSupervisor folder to your desktop PC, and run the MaxSupervisor
Setup program.
Uninstalling MaxSupervisor
To uninstall MaxSupervisor,
1. From the Windows Start menu, select Control Panel > Add/Remove
Programs.
2. Select MaxSupervisor and click Remove.
Automatic Upgrade
Each time you start up MaxSupervisor, a comparison is made with the
version of MaxACD that is running on the server. If updates were made on
the server, and your version of MaxSupervisor is out-of-date, you are
prompted for upgrade permission. If you automatically upgrade, the
MaxSupervisor startup is terminated and a software upgrade session is
started. Restart MaxSupervisor to run the newer version.
Note: For remote MaxSupervisor users outside the firewall, TCP port
10050 is required to be open to allow auto upgrade. Also, automatic
upgrade over the Internet requires the sending of 15 MB files over
the WAN, which may take some time, to perform the automatic
update.