User guide

AltiWare OE System Administration Manual 69
Trunk Configuration
C
HAPTER
4
Trunk Configuration
Trunk attributes and parameters are set using the Trunk Configuration
window. The attributes and options available depend on the type of board /
and trunk.
Trunks that are out of service are automatically tested by the system every
15 seconds. Once the situation is corrected, the trunk will be brought back
to service automatically. If none of the trunks are available when an outside
call is placed, the caller will hear the system prompt: “All outside lines are
busy, please try again later”.
There are three ways to access the Trunk Configuration
window: (1) Select the Management menu, then select Trunk
Configuration…; or, (2) Click the Trunk Configuration icon
on the Quick Access toolbar; or (3) Double-click a trunk listing in the
Trunk View window such as the example below, displayed on the
AltiWare desktop:
Figure 25. Trunk View window