User guide

Configuring the Triton Analog Station Board
AltiWare OE System Administration Manual 57
Board Configuration
Configuring the Triton Analog Station Board
Double click the board’s icon in the Boards window (Figure 15 on
page 53) to open the Board Configuration window.
Figure 18. Board Configuration window (Triton Analog)
Use the Board Configuration window to view the following attributes:
• Board Info: the Board Logical ID (assigned by AltiServ) and Board
Name (the type of board installed in the system and board ID). This is
informational only and cannot be edited.
• Channel Mapping List: shows the board Logical Channel, Physical
Span and Physical Channel. To reinitialize channels, select the
channel to reset and click the Reset Channel button, then click OK.
This is informational only and cannot be edited.
Double clicking a channel in this window invokes a
channel configuration window. Refer to the Line
Properties button in Extension Configuration. See
“Triton Analog Line Properties” on pag e94.
• Span Info: not available for Triton Analog Station boards.
• Board Configuration: displays the board’s serial number.
• Reset Board button - resets the board, after you confirm by accepting
a warning that resetting a board will disconnect all calls in progress
on that board. Be sure to inform all relevant users before resetting.