User guide

System Configuration
40 AltiWare OE System Administration Manual
Accessing Area Codes Setup
To access the Area Code window, select System Configuration... on the
Management menu, then click the Area Codes tab. Here’s an example of
the window:
Figure 9. Area Codes window, System Configuration
Adding and Deleting Entries
To add entries to one of the three lists, click the Add below the appropriate
list box. In the dialog box that appears, type in a number and click OK.
To Delete an entry, select it and click Delete. You can select multiple
entries for deletion by using Ctrl-click. Click Apply to save your changes
and OK to save and close the window.
You can type in an area code alone, or an area code + prefix if needed.
When you type the area code and prefix, optionally you can connect them
with a single hyphen—for example, 510-487, or 212-677. The optional
hyphen is for your convenience and readability. Using the same examples,
510487 and 212677 are also valid entries.