User guide

System Configuration
38 AltiWare OE System Administration Manual
Setting E-mail Messaging Options
To use the AltiWare e-mail services, configure the following settings.
• Enable SMTP/POP3 E-Mail Service. Selected, this enables
incoming and outgoing mail services on AltiServ—Simple Mail
Transfer Protocol (SMTP) and Post Office Protocol (POP).
— Allow Inbound Internet Mail. This check box option is activated
and selected by default if you enable the SMTP/POP E-Mail
Service. You can de-select this option if you don’t want to use the
AltiWare E-Mail service for inbound mail, for example when
you’re using another email server on the AltiServ system.
• Synchronize with Exchange Server. Before selecting this option to
use an Exchange Server, you should make sure the Exchange Server
and Windows / NT configuration is established. See the AltiGen
document, Exchange Server Integration in AltiWare OE.
Select this option if you are using an Exchange Server and want to
synchronize it and the AltiServ servers—that is, when emails or voice
mails are deleted from one service, they are automatically deleted
from the other server as well.
If you choose this option, you must type in the Exchange Server
Address. The name must be just the name of the machine or the fully
qualified domain name.