User guide

Setting up an Exchange Server
AltiWare OE System Administration Manual 171
Data and Internet
Integration
Complete the entries in this dialog box as follows:
• In the Log On As group, This Account should be checked and
<DomainName>\AltiGen_<ServerName> should be set as the
account. In this example, it is ALTICHINA\AltiGen_telesystem.
If this is not the case, you need to re-install AltiWare while logged
in as a domain administrator with local administrator privileges.
• Repeat the previous step, but this time, check the Log On As
account for AltiGen Exchange Integration Service COM Server.
On the Exchange Server
Check the version of NT by clicking the Start button, select Run, and type
winver in the Run dialog box.
You need to have Exchange Server 5.5 with Service Pack 3. Check the
version of Exchange Server by clicking the About button in the Exchange
Administrator.
You should be able to ping the Exchange Server from AltiServ and vice
versa. From the AltiServ system, open a MS-DOS window, and type
.
For example, you will type . You should see
as the response. If you see , there is something wrong
with your network settings or connectivity. Similarly, ping the AltiServ
system from the Exchange server. For example, you will type
from the command prompt in Exchange Server. You
should get proper reply.