User guide

Setting Default Routes
AltiWare OE System Administration Manual 125
Out Call Routing
Setting Default Routes
The Default Routes function allows you to create default routes for four
types of outgoing calls: local, long distance, international, and 911.The
default routes are used for all Out Call Routing dialing except for special
routing defined on the Dialing Pattern window described later in this
chapter.
Click the Default Routes tab in the Out Call Routing Configuration
window to display the Default Routes window. Here’s an example:
Figure 49. Default Routes, Out Call Routing Configuration
For each of the four types of calls, you can use the drop-down lists to select
up to six route definitions. The order you set, from 1 to 6, is the order used
by the system when placing the call.