User guide

Setting Monitor Lists
AltiWare OE System Administration Manual 119
Extension
Configuration
Setting Monitor Lists
The Monitoring List window provides for setting up lists of extensions for
which call processing events can be monitored by the user at a selected
extension. Once this monitoring list is established, the application logging
into an extension can receive AltiLink Plus events for the monitored
extensions. The monitored list is available in the AltiView monitor
selection panel. This function is available to physical extensions only.
To set up a monitoring list, select the extension number to receive the
monitoring rights from the list in the Extension Configuration General
window, then click the Monitor List tab. Here’s an example window:.
Figure 46. Monitor List window, Extension Configuration
Configuring a Monitor List
To add members to the list, select the extensions in the Monitor Available
list and click the Add button to move the extensions to the Monitor List.To
remove members, select the extensions in the Monitor List and click the
Remove button.
Select the Trunk Monitor Enable check box to allow monitoring of the
AltiLink Plus trunk events at the selected extension.
Click the Default button to return the settings to the default—the extension
can monitor its own calls.