User guide

Setting up Extensions
AltiWare OE System Administration Manual 95
Extension
Configuration
Configure the following hardware extension-specific features:
• Message Waiting Signal Type—FSK or None.
• Caller ID Signal Format—SDMF, MDMF or None.
• Line Disconnect Signal—the loop break desired for answering
supervision, either 200 or 600 ms.
• Receiver Gain/Transmission Attenuation - adjusts the incoming and
outgoing volume for every Triton Analog trunk or extension.
• Receiver Gain/Transmission Attenuation—incoming and outgoing
volume for every extension. Unlike the Quantum board, these slide
settings have positive and negative values. Both defaults are 0 dB.
— Receiver Gain—the gain control for decibels received (dB).
— Transmission Attenuation—the gain control for volume
transmitted in decibels (dB).
Use caution in setting the Receiver Gain or the
Transmission Attenuation. If either setting is too high, the
result will be distortion in voice quality.