User guide

Configuring AltiConsole Settings
22 AltiConsole User Guide
• For overhead paging, select whether to send the output to an audio
output (the same as pressing #44 on the phone pad) or to a trunk line
(#45). If you select a trunk line, use the drop down list to select the
trunk to be used for the overhead paging.
Overhead paging is configured in the AltiWare Administrator.
Check with your system administrator about the correct
settings for these options in AltiConsole.
Setting Speed Call List Entries
Click the Speed Call List tab to work on Speed Call entries. This is the list
that appears in the Speed panel view as described on page 8—you can dial
or transfer to these frequently used numbers with a click of a button.
To add a number:
1. Click the Add button in the Speed Call List window to open a dialog.
Figure 2. Setup Window
—
Add Frequent Call Entry dialog
2. Enter the number, first and last name of the user, workgroup or
external contact.
Outside phone numbers must include all necessary digits such as trunk
access code, long distance prefix, area code, etc.
Entering first and last name is optional; it can help you identify the
entry.
3. Click OK.