Specifications

Installation

AltiTouch Plus Installer’s Guide

Installation

Getting Started

Prior to Installation, please check the following:

• AltiWare OE Rev. 4.0a (4.0.3.0 or greater) is installed and running.

• The installer is logged into the computer with local administrative rights

• And for the intercom feature, AltiGen's 12 port PCI Analog Station Board (ALTI-TTAS-

12) has been installed and configured.

Installing The AltiTouch Plus Program:

The AltiTouch Plus program should be installed into the same drive as AltiWare.

1. Insert CD into the CD-ROM drive.

2. If the set-up program does not automatically play, double click on “setup.exe” on the

CD to run the set-up.

3. Follow the instructions on your screen.

4. AltiTouch Plus Server software MUST be installed in a directory whose path does not

have spaces in the name, therefore, do not install this in the program files directory.

5. Permissions – Please have your Network Administrator set the correct permissions for

the AltiTouch Plus to run as both an application and a service:

! To run the software an application, the user account(s) that launch the application

must have Full Control

permissions (full read/write control) to the application’s

directory (to the AltiTouch Plus folder).

! To run the software as a service, the system account must have Full Control

permissions (full read/write control) to the application’s directory (to the

AltiTouch Plus folder).