Specifications

System Requirements
AltiTouch Plus Installer’s Guide
3
System Requirements
Software:
• AltiGen's AltiWare OE Rev. 4.0.3.0 or greater installed and running.
(For versions of AltiWare OE Rev. 4.0a that are prior to version 4.0.3.0, please contact
your AltiGen dealer or AltiGen Communications on how to upgrade to version 4.0.3.0.)
• AltiTouch Plus software installed, registered and running on the AltiGen Server.
(AltiTouch Plus software is free, but must be registered to receive a free license number,
which is required in order to activate the program. For details, see section “AltiTouch
Plus Registration” on Page 5. )
• AltiWare Administrator must have the "Loop Current Break Duration" under the "line
properties" button extended to 750ms in order to use the intercom feature. It must be
extended on extensions receiving and on extensions sending Intercom calls. For details,
see section “AltiWare Configuration for Intercom”, on page 14.
Approved Hardware:
• AltiGen 12 port PCI Analog Station Board (ALTI-TTAS-12) requirements of the
AltiTouch Plus phone for the Intercom feature.
Also see requirements for AltiWare. Requirements for AltiWare 4.0 can be found in
AltiGen's AltiWare 4.0 Getting Started Manual.