Specifications

Advanced Configurations for Intercom
AltiTouch Plus Installer’s Guide
14
AltiWare Configuration for Intercom
In order to use the intercom feature, you will need to reconfigure extensions that will be using
the intercom feature to receive an intercom call. To do this, follow the instructions below:
1. Go to AltiWare Administrator.
2. Double click on an extension to get the Extension Configuration.
3. Under the “General” tab, select the “Line Properties” button.
4. Extend the “Loop Current Break Duration” time to 750ms.
5. Select “Apply to..” to apply this to more than one extension at a time.
6. Press “OK” when done.
Please note that due to the 750ms disconnect time, the phone will not remain on speakerphone if
you are using #81 mode. Also, if you move extensions to different ports from AltiWare Admin,
you need to restart AltiTouch Plus. However, you do not need to restart when logging in or out
of an extension by using the phone.