Specifications

Installation
AltiTouch Plus Installer’s Guide
7
8. Press the "Connect” button and go to the Monitor Activity Tab. If it has connected
successfully, you should see a list of extensions (This could take up to 20 – 30 seconds,
depending on the size of the phone system). To connect or disconnect from the AltiGen
manually, press the “Connect” or “Disconnect” buttons.
9. Under the Setup Tab, check the “Automatically Connect when program is started” checkbox
to connect to the AltiGen automatically whenever the program was started.
When making changes to the Set-up configuration, please be sure to press the “Disconnect”
button before making the changes, then press “Save” and “Connect to save your changes and
reconnect.
Setting up Speed Dials for Directory Services
The speed dials used in Directory Services are your AltiGen System Speed dials. These are set
up in AltiWare under System Configuration on the System Speed tab.
Since AltiWare does not log the description or name associated with speed dial numbers, the
AltiTouch Plus Administrator software includes a utility program for this. To access this, go to
the start menu, then “Programs” and under the “AltiTouch Plus” group you will find “Speed
Dials”. Click on this to open the Speed Dial Utility program.