Specifications

Logging In
4 CDR Manual
Note: The AlpInterface might be located under
“\WinNT\System32\”, “\Windows\System32\” or some other
location. Use the Search for Files and Folders feature to
locate and remove all AlpInterface.dll files from the system.
4. Install the CDR Search 4.6 software.
Logging In
There are two ways to log in to CDR search.
Administrator login lets you perform all three types of search described in
“CDR Search, Group CDR Search, WG Statistics” on page 1. To log in as
an administrator, your extension must be designated as the Manager
Extension in AltiAdmin or ACM Admin. See your system administrator for
details.
Workgroup supervisor login lets you run a Group CDR search or a WG
Statistics search, described in “CDR Search, Group CDR Search, WG
Statistics” on page 1. To log in as a workgroup supervisor, the option-pack
license must be installed on the server. For information on obtaining a
license, contact your Authorized AltiGen dealer.
Before you log in
When you log in for the first time, you need to know either the IP address
or the name of the server you’ll be linking to. (If you use the server name
rather than the IP address, CDR Search replaces the name with the IP
address the next time you log in.)
To obtain the AltiWare or ACM Admin IP address, ask your system
administrator.
Note: If you are connecting to the Internet through a modem, establish a
connection from your PC to your ISP before you log in to CDR
search.