Specifications

Phone Functions
IP 705 Manual 37
Flash button Signals PBX that special
instructions will follow.
• Press the Flash button.
Headset The 5th programmable
key can be programmed as
a Headset key. When
pressed, the user will be
able to activate the RJ-9
headset port.
• This button is used as a hook
switch for headset ports.
Hold button Places an active call on
hold.
• When multiple Call Waiting
Feature is enabled at the extension,
the user can put multiple incoming
calls on hold and retrieve using the
phone’s / buttons and Enter
button.
• Pressing Hold while onhook will
retrieve the last hold call.
• Supports up to 9 hold calls.
Line Park A parked call line
appearance can be
assigned as a
programmable Line Park
key by the administrator.
When connected to a
caller, the call can be
parked by pressing the
Line Park key. If a call is
parked at a Line Park line,
the button’s light is on.
The call can be picked up
by pressing the Line Park
key.
• Go to AltiGen IP Phone
Configuration on the
Management Menu, go to the
desired extension, and set the
appropriate function key to Line
Park.
• When configured by the
administrator, the IP phone can
play an audible beep or one of
several different ring tones when a
call is parked.
• When configured by the
administrator, an alternate way to
pick up a parked call is to use #51
<line number> if Line Park is not
assigned to a programmable key.
• The Line Park key’s light will be
lit and turns off when the parked
call is picked up, the caller hangs
up, or the call is routed to IVR/
Auto Attendant.
Mute button While on a call, mutes
conversation.
• Feature does not require special
configuration to work.