Specifications

Phone Configuration
IP 705 Manual 29
9. On the second line of the LCD screen, the following messages are
displayed in succession:
—CHECK MEMORY (RAM checking state)
—CHECK FW (Firmware checking state)
—INIT NETWORK
—LOADING FW...
—LOADING NOW.
—Boot Done
—INITIALIZING
—Version 060D.010B.1442
10. You may display the version of firmware at any time: Press the Menu
button, scroll to SYSTEM and press Enter, scroll to Version Info
and press Enter.
Configuring NAT
NAT (Network Address Translation) is the translation of an IP address
used within one network to a different IP address known within another
network. One network is designated as the inside network, the other is the
outside. The IP 705 can be enabled to support H.323 behind NAT. The IP
705 will be able to work behind a regular NAT router without any special
implementation for H.323.
For more detailed information regarding NAT configuration guidelines and
implementation, refer to the AltiWare OE/ACC or ACM System
Administration Manual.
Note: If more than one IP 705 phone sits behind NAT, a VPN tunnel is
required to connect between the NAT router and the corporate
router.
Enabling NAT
By default, NAT is not enabled. If you connect the IP 705 behind a NAT
router, you must enable NAT.
To enable NAT,