Specifications

Installation
IP 705 Manual 19
3. On the second line of the LCD screen, the following messages are
displayed in succession:
—CHECK MEMORY (RAM checking state)
—CHECK FW (Firmware checking state)
—INIT NETWORK
—LOADING FW...
—LOADING NOW.
—Boot Done
—INITIALIZING
—Version 060D.010B.1442
If the phone successfully passes through these stages, it has started up
properly. If it doesn’t, refer to “Troubleshooting” on page 43.
Other Phone Already Logged On To Extension
If another analog phone or IP phone is already logged on to the same
extension, rebooting the IP 705 will not register the phone successfully.
The user must press #27 on the IP phone to actively log on to AltiServ.
After the extension is logged on and activated, the calls are redirected to
this IP phone.
Important: The user should not use the VM option to log on to the IP 705
phone.
Executing Plug and Play After IP Phone is
Started
If you have already started the IP phone and want to execute the plug and
play feature, perform the following steps:
1. Power up the IP phone (the phone should be in Basic mode).
2. Press the Menu button.
3. Press * * 2 then the Enter button to restore default settings.