Specifications

18 IP 705 Manual
• TCP/UDP 49152 ~ N (for H.245 and RTP/RTCP); where N =
49152 + (62 * number of VoIP boards) - 1.
7. Configure the IP 705 phone’s AltiWare address:
a. Press the Menu button, scroll to SYSTEM, and press Enter.
b. Select AW SERVER, and press Enter.
c. Enter the AltiWare server address, using the * key to input periods,
and press Enter.
8. Exit the menu, using the Release button or the button.
9. Press #27 then press Enter to initiate logging onto AltiServ.
10. The phone will attempt to register as shown in the LCD screen.
If the phone successfully passes through these stages, the phone
shows the time and extension in the LCD screen and is now in normal
operating mode.
If it doesn’t, refer to “Troubleshooting” on page 43.
Note: When the IP 705 phone registers with AltiServ, the AltiWare
IP address, TFTP (IP) address, and other network-related
configuration parameters override the settings in AltiAdmin.
Other parameters, such as hour offset, trunk access code, and
debug are overridden by the settings in AltiAdmin.
11. Set up IP phone properties in AltiWare as described in step
6 on page 10.
Verifying the Phone Startup Process
After the IP 705 has power connected to it, the phone begins its automatic
booting process by cycling through these steps:
1. All LED lights will be on.
2. The LCD screen displays [ATGN BOOT] on the first line.