Specifications

Installation
IP 705 Manual 15
IMPORTANT!
When the IP 705 phone is registered with the system, its local
configuration is overridden by the configuration in AltiAdmin/
ACM Admin. However, once the IP phone is successfully
registered, configuration changes made on the phone override
the AltiWare IP address and network-related settings on the
server.
If the IP phone’s local configuration is changed while in Basic
mode, the changes are overridden by AltiAdmin/ACM Admin
settings.
Program-
mable
Keys 1 - 5
(cont.)
• Call Record - when selected, the IP phone user can
start and/or stop voice recording on demand. In the
Extension Configuration screen on the General
page, Record on Demand to Extension VM or
Record on Demand to Central Location must be
enabled in the Call Recording Options field. Press
the key to start recording, press the key again to stop
recording. There is no pause function. When the call
is recording, the light will be on. Recorded
conversations can then be played back through
voice mail or accessed at a centralized location.
WARNING!
Listening in to or recording a conversation without
the consent of one or both parties may be a
violation of local, state and federal privacy laws. It
is the responsibility of the users of this feature to
assure they are in compliance with all applicable
laws.
• User Defined # - when selected, the IP phone user
will be able to program the corresponding
programmable key as a speed dial or feature code
key directly from the IP phone menu: PHONE
SETTING > PROGRAM KEYS > PROGRAM KEY.
• Headset - (available in function key 5) when
selected, the IP phone user will be able to activate a
the headset port.
Parameter Description