Specifications

IP 705 Manual 7
C HAPTER 2
System & Network Requirements
System Requirements
• AltiWare OE 5.0A Update 4 or higher
• AltiGen OE 5.0A GateKeeper or higher (to support plug and play
functionality)
Network Requirements
• Network connection — the IP phone must have TCP/IP connection to
the related AltiWare system
Important: Make sure a Layer 3 Managed Ethernet switch is used,
rather than a hub, in the corporate LAN. A Layer 3
Managed Ethernet switch provides adequate Quality of
Service for VoIP deployment.
• DHCP Server (to get an IP address dynamically, when necessary)
• TFTP Server (to update the IP phone firmware, when necessary)
• GateKeeper (for plug and play feature)
AltiAdmin/ACM Admin Configuration
Requirements
• The IP 705 requires an IP extension to be enabled in AltiAdmin to
handle call processing. Refer to the “Setting Up IP Extensions” chapter
in the AltiWare OE/ACC System Installation & Administration
Manual or ACM System Administration Manual for detailed
instructions on how to set up an IP extension to manage the IP phone.
• The IP phone settings must be pre-configured in AltiAdmin/ACM
Admin before setting up configuration for the IP 705.