Specifications

IP 710 Manual 38
Line Park A parked call line
appearance can be
assigned as a
programmable “Parked
Call Line” key by the
administrator. When
connected to a caller, the
call can be parked by
pressing the Parked Call
Line key. If a call is
parked at a Parked Call
Line, the button’s light is
on. The call can be picked
up by pressing the Parked
Call Line key.
• Go to AltiGen IP Phone
Configuration on the
Management Menu, go to the
desired extension, and set the
appropriate function key to Line
Park.
• When configured by the
administrator, the IP phone can
play an audible beep or one of 14
different ring tones when a call is
parked.
• When configured by the
administrator, an alternate way to
pick up a parked call is to use #51
<line number> if Line Park is not
assigned to a soft key.
• The Parked Call Line key’s light
will be lit and turns off when the
parked call is picked up, the caller
hangs up, or the call is routed to
IVR/Auto Attendant.
Mute button While on a call, mutes
conversation.
• Feature does not require special
configuration to work.
Program Soft
Keys
Lets users associate a soft
key with a speed dial
number or feature code
directly from the IP
phone.
• In AltiAdmin, go to AltiGen IP
Phone Configuration on the
Management Menu, go to the
desired extension, and set the
appropriate function key to User
Defined #. The user will be able to
configure this key from the IP
phone menu, under PHONE
SETTINGS > PROGRAM KEYS.
Redial button Redials a selected number
from the last16 numbers
dialed.
• Feature does not require special
configuration to work.
• Redials up to 32 digits.
Release
button
Releases a call from the
connected state. Deletes
characters entered on the
LCD. While onhook,
releases phone from an
active state.
• Feature does not require special
configuration to work.