Specifications

IP 710 Manual 30
Note: If more than one IP 710 phone sits behind NAT, a VPN tunnel is
required to connect between the NAT router and the corporate
router.
Enabling NAT
By default, NAT is not enabled. If you connect the IP 710 behind a NAT
router, you must enable NAT.
To enable NAT,
1. Press the Menu button.
2. Use the  button to scroll to NETWORK, then press the Enter button.
3. Scroll to ENABLE NAT, and press Enter.
4. Press  to select YES, and press Enter.
Setting Ring Tones
The IP 710 phone has 14 ring tones available. To set the ring tone:
1. Press the Menu button.
2. Select PHONE SETTING, then press the Enter button.
3. Scroll to RING TONES and press Enter.
4. Scroll to the desired ring tone and press Enter.
When new ring tones are added to the server, they can be downloaded from
the phone. To download ring tones:
1. Select PHONE SETTING and press Enter.
2. Select RING DOWNLOAD and press Enter.
3. Select YES and press Enter.
Note: Custom ring tones are not supported.
Distinctive Ringing Support
If the Distinctive Ring options are enabled by the system administrator in
AltiAdmin/ACM Admin (General page of System Configuration), you
may have three different ring cadences that distinguish the types of calls:
• Internal call = 1 ring
• External call = 2 rings