Specifications

IP 710 Manual 18
port in the TCP/IP or UDP packets. When an H.323 endpoint is
behind the H.323 NAT, you should set up the forwarding to a private
IP address of this H.323 endpoint.
If this H.323 endpoint is AltiWare, the NAT router must be
configured to forward the following ports to the H.323 endpoint’s
private IP address:
• TCP port 10032 (for phone service)
• TCP port 1720 (for H.225)
• TCP/UDP 49152 ~ N (for H.245 and RTP/RTCP); where N =
49152 + (62 * number of VoIP boards) - 1.
6. Configure the IP 710 phone’s AltiWare address:
a. Press the Menu button, scroll to SYSTEM, and press Enter.
b. Select AW SERVER, and press Enter.
c. Enter the AltiWare server address, using the * key to input periods,
and press Enter.
7. Exit the menu, using the Release button or the button.
8. Press #27 then press Enter to initiate logging onto AltiServ.
9. The phone will attempt to register as shown in the LCD screen.
If the phone successfully passes through these stages, the phone
shows the date, time, and extension in the LCD screen and is now in
normal operating mode.
Otherwise, refer to “Troubleshooting” on page 43.
Note: The IP 710 AltiWare IP address, TFTP (IP) address and other
network-related configuration parameters will override the
AltiAdmin’s settings when the phone registers with AltiServ.
Other parameters will still be overridden by the AltiAdmin
settings as before.
REGISTERING...
01/12 04:16PM x300