Specifications

IP 710 Manual 16
6. Connect the IP 710:
a. Connect the phone to the LAN that AltiServ is on.
b. Connect the handset to the handset port.
c. Connect an Ethernet cable from another network device, such as a
desktop computer, to the PC access port on the phone (optional).
d. Connect the power plug to the DC port.
Note: If you want to use Power over Ethernet, see “To Use IP 710
in Power over Ethernet Mode” on page 21.
7. Configure startup network settings:
If you are using DHCP, ensure that DHCP is enabled on the IP 710
phone: Menu > NETWORK > ENABLE DHCP > Yes. (DHCP is
enabled by default.)
If you are not using DHCP, you must configure these network settings
on the IP 710 after installing the phone on the network:
• Local IP address
• IP subnet mask
• Gateway IP address
8. Configure the AltiWare IP settings:
If you are using GateKeeper Auto Discovery, you do not need to
configure anything. Proceed to Step 9.
If you are not using GateKeeper Auto Discovery, you must manually
configure the AltiWare IP address setting into the IP 710 phone:
a. Menu > SYSTEM >Enter.
b. Select AW SERVER, and press Enter.
c. Enter the AltiWare server address, using the * key to input periods,
and press Enter.
9. Activate the IP 710 extension from the IP phone:
a. With the handset onhook, press #27, then the Enter button.
b. Enter the extension number and password when prompted.