Specifications

Appendix A
Alti-IP 600 Administration Manual 39
Alti-IP 600 Running Messages
The following messages may be displayed in the LCD when running the
Alti-IP 600:
Message Definition
AW UNREACHABLE! Failedto connect to the AltiGen phone server. The
user is trying to register the IP phone with an
invalid IP phone’s IP address or the AltiGen
Phone Server's IP address is invalid.
Or, the network connection is lost in offhook or
connect state.
Refer to “AltiWare is unreachable.”
section of “General Troubleshooting” on page 35.
Basic-Idle! IP phone is operating in Basic Mode.
Execute #27 again to reactivate.
Check IP Phone Service
Verify extension is configured for dynamic.
DHCP FAIL! Although DHCP was enabled,the Alti-IP 600 was
not able to receive the IP address from the DHCP
server.
INVALID IP!
INPUT AGAIN...
The inputted IP address is invalid.
INVALID VAL! During register of IP extension, an invalid
response (return value) returned from phone
server.
NO IP ADDR! Alti-IP 600 cannot attach an IP address due to
network failure.
No Network! Phone has lost Ethernet connection.
REGISTER FAIL! Cannot register to the AltiGen phone server.
REGISTER OKAY! IP extension registered successfully.