Specifications

Alti-IP 600 Administration Manual 31
Soft Keys
1-10
Quickly performs a
specified function
(BusyLampField,
AltiServ Feature Code,
Phone Setting or Speed
Dial) previously
configured by the
System Administrator.
(Soft key #6 is
configured as FLASH
by default. All other
soft keys are set to
Phone Setting by
default.)
• In AltiAdmin, go to Extension
Configuration>StationSpeed
and enter the Speed Dial entries
for the appropriate extension(s).
Then, go to AltiGen IP Phone
Configuration on the
Management Menu, go to the
desired extension, and set the
appropriate soft key to the
desired function (BLF, Feature
Code, Phone Setting, Speed
Dial).
Speaker Enables use of speaker
phone.
• Feature does not require special
configuration to work.
Speed
Dial
Quickly dials a
specified number that
has been previously
stored.
• In AltiAdmin, go to Extension
Configuration>StationSpeed
and enter the Speed Dial entries
for the appropriate extension(s).
Then, go to AltiGen IP Phone
Configuration on the the
Management Menu, go to the
desired extension, and set the
appropriate function key to
Speed Dial and enter the speed
dial code in the field below.
Transfer
(XSFR)
Transfers an active call
to another number.
• Feature does not require special
configuration to work.
• You cannot use this button to
“flash” after using it to transfer
a call. If you want to reconnect
to a call after using the XSFR
button, you must use the
$(BACK key).
Voice
Mail
(VM)
Enables access to voice
messages.
• The VM count that appears in
the LCD displays new messages
(previously heard messages are
not included).