Specifications

System Requirements
AltiContact Manager Administration Manual 2-7
2. System
Requirements
2. System
Requirements
Triton Analog Trunk Board
The Triton Analog Trunk board comes in two models: Loop Start/Ground
Start (LS/GS) and Loop Start only (LS). It supports 12 analog trunks and
offers FSK Caller ID receiving, Centrex flash, and voice/silence activated
answer supervision. This board is also compatible with major PCI chassis
vendors.
The Triton Analog Trunk board has the following functional
characteristics:
• MVIP-compatible
• 256 Port Non-Blocking Switch Matrix
• Jumper-Free Configuration
• 32-bit, 5v PCI Bus
• Compliant with EIA464
• Tone detection for fax tone, modem tone and voice
• E-911 CAMA trunk support
Triton VoIP Board
The Triton VoIP telephony board has the following functional
characteristics:
• MVIP-compatible
• 256 Port Full-Duplex Switch Matrix
• Jumper Free Configuration
LS/GS LED Indicators* LS LED Indicators
LED 1B LED 1A Status LED 1B LED 1A Status
ON ON Normal ON ON Normal
OFF OFF No power to board OFF OFF No +5V or less than
4.1V
ON OFF No +5V or less than
4.1V
OFF ON No +12V or less than
9.2V
*LED 2, located on the board, is a red LED for
diagnostic purposes. If it is ON, the fuse is blown.