Specifications

TAPI Integration
AltiContact Manager Administration Manual 27-5
27. TAPI Integration
Set Up Phone Dialer
1. Launch Phone Dialer: From Windows 2000, select Start > Programs
> Accessories > Communication. From Windows XP, go to Start >
Run, type Dialer.exe, and click OK.
2. In the Phone Dialer, select Edit > Options.
3. In the Preferred line for calling section, select Phone.
4. In the Line used for section, select the client extension in the Phone
calls drop-down list, and click OK.
Testing TAPI Service Provider on the Client System
To test TAPI Service Provider on the client system:
1. Click the Dial button in the toolbar.
2. Enter a number to call in the Number to Dial box, and click Place
Call.
The client extension should ring. When you pick up the phone, the
system will dial the number you entered and connect you (if the
extension is configured to dial an outside number). If this does not
work, make sure your previous configurations are correct.
Note: Reboot the client system after any configuration changes to
make sure the changes take effect completely.