Specifications

Configuration Procedures
23-4 AltiContact Manager Administration Manual
At the Secondary Server:
4. Power on the secondary system, configure boards, and reboot if
necessary.
5. Don't change any other configurations. Go to the Redundancy
Configuration window (select Redundancy from the System
Management menu), and:
— Select System Role as Secondary.
— Check the Enable Redundancy check box.
— Enter IP address for the Primary Address, Secondary Address,
and AB-Switch Address.
—Enter a Redundancy Key (your password for redundancy; needs to
be the same for Primary and Secondary systems).
Figure 3. Redundancy Configuration - Secondary System
Click OK or Apply when finished.
Redundancy Initialization
Run Redundancy Administration (click the Status button in the
Redundancy Configuration window) from either the Primary or
Secondary system, making sure all services on both systems are running.
The secondary system will replicate primary system's configuration, voice
mail and other files, which will take from several minutes to an hour,
depending on the amount of extensions and their voice mail files.