Specifications

22-10 AltiContact Manager Administration Manual
• The Alti-Mobile Extension’s “Primary Caller ID” field under Caller
Identification may need to include the area code. This field requires a
perfect match to accept a call from the mobile PSTN phone. Some
local COs will send the area code with the Caller ID even though the
call is in the home area code.
• No caller name delivery to the Alti-Mobile Extension is supported.
• No Message Waiting Indicator delivery is supported. (Use Message
Notification as a workaround).
• If the Alti-Mobile Extension is using dynamic link between the virtual
and physical mobile extension channels, the caller ID is required for
verification purpose when the Alti-Mobile Extension calls in the
system to get system outbound dialing.
• Since the DTMF key * is used for simulating the FLASH-HOOK,
there is no way to send * to system. So the central transfer, IVR, VM
(backward the VM menu) and boomerang features are limited.
• For RNA for Alti-Mobile Extension, the ring count may not be
accurate.
• On Triton Analog boards with answer supervision, strange behavior
may occur.
• When placing calls to a AltiMobile Extensions that are cellular phones,
if the cellular phone is out of signal range, the caller may hear long
periods of silence.