Specifications

20-2 AltiContact Manager Administration Manual
To set up a Paging Group:
1. In the General tab of the Paging Group configuration window, click
the Add button, then enter a number for the paging group in the Add
New Group dialog box and click OK.
Figure 2. Add Line Park dialog box
2. In the Group Information field, type in the following:
• First Name and Last Name of the paging group, each with a
maximum of 32 characters.
• Password for the paging group. The default is the system password
set on the Number Plan tab of the System Configuration window.
• Description for the paging group.
To Add Members to a Paging Group:
1. On the Group Member tab of the Paging Group configuration
window, click the extension(s) in the Not Member list.
2. Click the Add button to move them to the Member List.
3. When a member is added, its default state is Login.
4. Paging group member can use #54 to perform group login or group
logoff. If a member is logged off, then it will not receive group paging.
To Remove Members Assigned to a Paging Group:
1. On the Group Member tab of the Paging Group configuration
window, click the extension(s) in the Member list.
2. Click the Remove button to move them to the Not Member List.