Specifications

Trunk Configuration
AltiContact Manager Administration Manual 7-19
7. Trunk
Configuration
a) Go to VoIP Board configuration and click the Advance button.
b) Set the Transmitting gain to IP Extension to 3 for the Triton
Analog Trunk. (Do NOT change the gain in the trunk property
of the Triton Analog Trunk Board, since it may impact the echo
canceller performance.)
• If the reading is -6 dB to -14 dB, for example, -12dB, no change is
needed.
• If the reading is -15 dB to -18dB, take the following steps to
increase the gain for the Triton Analog Trunk to IP phone
connection:
a) Go to VoIP Board configuration and click the Advance button.
b) Set the Transmitting gain to IP Extension to 9 for the Triton
Analog Trunk. (Do NOT change the gain in the trunk property
of the Triton Analog Trunk Board, since it may impact the echo
canceller performance.)
• If the reading is worse than -18 dB, you should contact your CO to
adjust the line loss to the acceptable range.