Specifications

Board Configuration
AltiContact Manager Administration Manual 6-7
6. Board
Configuration
The Board Configuration window contains the following attributes:
Configuring the Triton VoIP Board
Important: It is strongly recommended that system administrators review
the “Network Configuration Guidelines for VoIP” on page 9-9
before setting up VoIP features.
Parameter Description
Board Info Group Board Logical ID: assigned by AltiContact
Manager.
Board Name: the type of board installed in the
system and board ID.
Note: This is informational only and cannot be
edited.
Channel Mapping
List Group
Shows the board Logical Channel, Physical Span,
and Physical Channel.
To reinitialize channels, select the channel to reset
and click the Reset Channel button, then click OK.
Note: This is informational only and cannot be
edited.
Note: Double clicking a channel in this window
invokes a channel configuration window.
Span Info Not available for Triton Analog Trunk LS/GS and
LS boards.
Board Configuration Displays the board’s serial number.
Reset Board Resets the board, after you confirm resetting by
accepting a warning.
Important: Resetting a board will disconnect all
calls in progress on that board! Be sure
to inform all users before resetting a
board.