Specifications

Board Configuration
AltiContact Manager Administration Manual 6-3
6. Board
Configuration
Use the Board Configuration window for the Quantum board to view the
following attributes:
Parameter Description
Board Info Board Logical ID: assigned by AltiContact
Manager.
Board Name: the type of board installed in the
system and board ID.
Note: For Quantum boards in a Windows 2000
system:
• the physical board ID 0 is not supported
• the valid physical board IDs are 1–15
Channel Mapping
List
Logical Channel, Physical Span, and Physical
Channel for the entire board.
To reset the channel, select the channel to reset and
click the Reset Channel button, then click OK.
Note: Depending on whether the channel is a line or
a trunk line, double clicking a channel in this
window invokes either a Line Properties
window (see “Quantum Line Properties” on
page 14-11, or a Trunk Line Properties
window (see “Quantum Trunk Properties” on
page 7-6).
Span Info Not available for Quantum boards.