Specifications

Running ACM Administrator
3-44 AltiContact Manager Administration Manual
To install ACM Administrator on a non-AltiServ PC for the first time:
1. Insert the AltiContact Manager CD-ROM into the appropriate drive.
2. Run SETUP.EXE from the ACM Admin folder.
3. Follow the instructions on the window.
4. To open ACM Administrator, refer to “Running ACM Administrator”
on page 3-44.
Running ACM Administrator
To run AltiContact Manager Administrator:
1. Choose Programs from the Windows Start button and click on ACM
Administrator in the AltiContact Manager or ACM Admin folder.
2. If you are opening ACM Administrator, enter the server name when
prompted. If you are logging into ACM Administrator at a remote site
to administer AltiContact Manager over the Internet, enter the IP
address (e.g. 100.100.100.100) of the AltiContact Manager system
when prompted for the server name. Multiple AltiContact Manager
systems can be managed at a single location with an ACM
Administrator open for each AltiContact Manager system.
3. Login by Selecting the Services Login or clicking the
Login icon—the left-most icon in the Toolbar. The Login
Password window prompts you to enter the password and
click OK. The system default password is “22222.” You should
change the system password as soon as possible to ensure system
security. For more information, refer to “Logging in for the First
Time” on page 4-1.
Once you are logged in, you can configure the AltiContact Manager
system.
Shutting Down AltiContact Manager when
Changing or Adding Hardware
When you add or change hardware, follow these procedures to back up and
shut down the AltiContact Manager system. The best time to do this is
during off hours—the system should be idle.