Specifications

TAPIT CDR Loader
CDR Manual 89
TAPIT CDR Loader
Each location should have the following options set:
a. Path - accept the default value.
b. Time to call: and Next call: fields - these values pertain only to a
buffer box. When the CDR Loader is used, they are ignored.
c. PBX Format - make sure the appropriate PBX format is selected.
d. Buffer Box Type - select the File option.
e. Uncheck Buffer Box adds extra Date/Time stamp to each
record.
3. Follow Steps 1 through 13 of the Setting Up TAPIT and CDR
Loader for the Single Node section above.
4. ClickontheMulti Sites button. The MultiSite Settings screen
appears. If this is a new installation this screen is empty.
5. ClickontheCon4Mon.ini button. Your default text editor opens the
Con4Mon.ini file. Copy the following settings into this file.
;Reference table to handle multiple nodes:
[Multi_S]
;must be = total/max number of locations used
;(if last S_xxx is S_004 then Max_S=4)
;thiese are a sample entries: