Specifications

Setting Up TAPIT and CDR Loader for Single Node (AltiGen)
84 CDR Manual
3. CDR Loader requires special setup depending on the type of
installation (Single Node or Multi Node). When the installation is
completed proceed with instructions below.
Setting Up TAPIT and CDR Loader for Single
Node (AltiGen)
Note: The Node data will be stored in the Main location database.
1. Open TAPIT application (Start/Programs/Tapit/Tapit).
Go to the System Maintenance/System Parameters/Communications
screen.
2. Check the Load Calls from Text File box. The default path field (i.e.
"C:\TAPITW32\DATA\MAIN\telmsg.dat") is activated. Accept the
default.
3. Verify the Use Computer or Telephone System Date? option. It
must be set to PBX.
4. Check eXtended Processing and make sure the correct PBX Type is
selected.
5. Click on OK.
6. Close TAPIT.