Specifications

Call Accounting Report Formats
AltiContact Manager Administration Manual A-3
A. Call Accounting
Report Formats
CallerPad Line’s physical address for an
incoming call
UCHAR
(5)
E.g. “0004”, where
“00”=slot,
“04”=channel
Always “-1-1” for WG
or virtual extension
CallerNum Caller phone number of an
incoming call (extension
number or off-net PSTN)
UCHAR
(41)
CallerName Caller name for an incoming
call (provided by CO for trunk
calls; as entered in AltiAdmin
for extension calls)
UCHAR
(65)
TargetType Type of line for an outgoing
call
UBYTE 0=None
1=Ext analog
2=Ext IP
3=Ext PHS (not used)
4=Ext virtual
5=Ext WG
11=trk analog
12=trk T1
13=trk IP
14=trk PRI
15=trk PHS (not used)
TargetPad Physical address of line for an
outgoing call
UCHAR
(5)
E.g. “0004,” where
“00”=slot and
“04”=channel
TargetNum Target phone number of an
outgoing call (extension
number or off-net PSTN)
UCHAR
(41)
TargetName Target name for an outgoing
call (as entered in AltiAdmin
for extension calls)
UCHAR
(65)
WGNum Workgroup number for an
incoming call
UCHAR
(8)
Table 1: CDR Call Format
Database
Element
Definition Type Specification