Specifications
Table Of Contents
- Preface: About This Manual
- Overview
- Key AltiContact Manager Characteristics
- Call Center/IP PBX Features
- Automatic Call Distribution Features
- IVR Features
- AltiGen Voice Mail Features
- Internet Integration Features
- System Administration Features
- T1/PRI/E1 Features
- Voice over IP Features
- Voice over IP Session Support AltiContact Manager Features
- AltiWare Tools
- Optional Add-On Software
- Optional Add-On Products
- Optional Kits
- Key AltiContact Manager Characteristics
- System Requirements
- Hardware Requirements
- System Key Requirement
- Selecting the AltiContact Manager Platform
- Minimum System Requirements
- Proper Grounding and Loop Current
- Uninterruptible Power Supply (UPS)
- Operating Environment
- AltiGen Telephony Boards
- Functional Specifications
- AltiGen Board Installation
- AltiGen Board Options
- System Limitations
- Power Requirements
- Heat Factor
- Installing a Cooling Fan
- Proper Board Handling Procedures
- Electrostatic Discharge (ESD) Warning
- Operating Environment
- Packaging for Shipment and Storage
- AltiContact Manager Conference Resource Limits
- Software Installation
- Software License Activation and Registration
- New Installation
- Upgrading AltiWare OE
- License Activation and Registration Process
- Online License Registration Procedures
- Manual Online License Registration Procedure
- Offline Registration Procedures
- Windows Emergency Repair Disk
- Installing ACM Administrator on Remote Systems
- Running ACM Administrator
- Shutting Down AltiContact Manager when Changing or Adding Hardware
- Transferring the AltiContact Manager to Another Server Chassis
- AltiContact Manager Uninstall
- Software Installation Troubleshooting
- Getting Around ACM Administrator
- System Configuration
- Setting General Parameters
- Setting a System Number Plan
- Setting Business Hours
- Routing Calls on Holidays
- Configuring System Speed Dialing
- Defining System Call Restrictions
- Creating Account Codes
- Setting up Call Reports
- Using a Tenant Table
- Country Relevant
- CT-Bus Clock Configuration
- Audio Peripheral Configuration
- Board Configuration
- Trunk Configuration
- Voice Mail Configuration
- VoIP Configuration
- Defining an IP Dialing Table
- Setting VoIP Codecs
- Network Configuration Guidelines for VoIP
- Network Configuration Guidelines for the Alti-IP 600
- Configuration Guidelines for NAT
- Firewall Considerations
- Setting up H.323 Traffic Forwarding for H.323 NAT
- Setting Up an AltiContact Manager-to- AltiContact Manager IP Network
- Out Call Routing Configuration
- IVR Configuration
- CallCenter Configuration
- Agent Configuration
- Huntgroup Configuration
- Workgroup Configuration
- Setting Up IP Extensions
- Alti-IP 600 Phone Configuration
- Application Extension Configuration
- System Data Management
- System Report Management
- Data and Internet Integration
- AltiWeb
- Using TAPI
- Tools
- Basic Call Router & Call Router Advanced
- Call Accounting Report Formats
- E1 R2 CAS Installation
- Product Repair Services & Technical Support
- Glossary
- Index
- Readers Comment Form
Data and Internet Integration
AltiContact Manager Administration Manual 21-27
21. Data and Internet
Integration
For example, if you have 10GB voice mails on the AltiGen server and
are enabling Exchange Integration for all the mailboxes, it may take up
to 24 hours to initialize the Exchange Integration service.
On the other hand, if you have less than 100MB of voice mails on the
AltiGen server, the initialization will take less than 5 minutes.
• When checking the profiles using the mail icon in the control panel of
AltiContact Manager, you should see one account for each mailbox.
You will see these profiles only if you are logged on as the AltiGen
service account (e.g. AltiGen_telesystem).
Exchange Server 2000 Integration
In the example that follows, the AltiContact Manager system is called
ALTIWARE4_1 and the Exchange Server is called GOLDMINE. Both
systems belong to the NT domain called HAPPINESS.
Important: The Windows 2000 server must be the Primary Domain
Controller.
Prerequisites
Two Windows servers:
• One Windows NT server with the AltiContact Manager software
• One Windows 2000 server with Exchange Server 2000 software
Important: When you install the Exchange Server, you must log in as the
Domain Administrator, NOT the Local Administrator.
Also note that the Windows 2000 server must be the Primary
Domain Controller.
AltiContact Manager System Prerequisites
• Windows NT 4.0
• AltiContact Manager software version 4.6 or higher
• The AltiContact Manager system and the Exchange server system
must belong to the same NT domain.
• AltiGen Services should be started with the user account
<Domainname>\AltiGen_<AltiContactManagerSystemName>.
For example, HAPPINESS\AltiGen_ALTIWARE4_1.