Specifications
Table Of Contents
- Preface: About This Manual
- Overview
- Key AltiContact Manager Characteristics
- Call Center/IP PBX Features
- Automatic Call Distribution Features
- IVR Features
- AltiGen Voice Mail Features
- Internet Integration Features
- System Administration Features
- T1/PRI/E1 Features
- Voice over IP Features
- Voice over IP Session Support AltiContact Manager Features
- AltiWare Tools
- Optional Add-On Software
- Optional Add-On Products
- Optional Kits
- Key AltiContact Manager Characteristics
- System Requirements
- Hardware Requirements
- System Key Requirement
- Selecting the AltiContact Manager Platform
- Minimum System Requirements
- Proper Grounding and Loop Current
- Uninterruptible Power Supply (UPS)
- Operating Environment
- AltiGen Telephony Boards
- Functional Specifications
- AltiGen Board Installation
- AltiGen Board Options
- System Limitations
- Power Requirements
- Heat Factor
- Installing a Cooling Fan
- Proper Board Handling Procedures
- Electrostatic Discharge (ESD) Warning
- Operating Environment
- Packaging for Shipment and Storage
- AltiContact Manager Conference Resource Limits
- Software Installation
- Software License Activation and Registration
- New Installation
- Upgrading AltiWare OE
- License Activation and Registration Process
- Online License Registration Procedures
- Manual Online License Registration Procedure
- Offline Registration Procedures
- Windows Emergency Repair Disk
- Installing ACM Administrator on Remote Systems
- Running ACM Administrator
- Shutting Down AltiContact Manager when Changing or Adding Hardware
- Transferring the AltiContact Manager to Another Server Chassis
- AltiContact Manager Uninstall
- Software Installation Troubleshooting
- Getting Around ACM Administrator
- System Configuration
- Setting General Parameters
- Setting a System Number Plan
- Setting Business Hours
- Routing Calls on Holidays
- Configuring System Speed Dialing
- Defining System Call Restrictions
- Creating Account Codes
- Setting up Call Reports
- Using a Tenant Table
- Country Relevant
- CT-Bus Clock Configuration
- Audio Peripheral Configuration
- Board Configuration
- Trunk Configuration
- Voice Mail Configuration
- VoIP Configuration
- Defining an IP Dialing Table
- Setting VoIP Codecs
- Network Configuration Guidelines for VoIP
- Network Configuration Guidelines for the Alti-IP 600
- Configuration Guidelines for NAT
- Firewall Considerations
- Setting up H.323 Traffic Forwarding for H.323 NAT
- Setting Up an AltiContact Manager-to- AltiContact Manager IP Network
- Out Call Routing Configuration
- IVR Configuration
- CallCenter Configuration
- Agent Configuration
- Huntgroup Configuration
- Workgroup Configuration
- Setting Up IP Extensions
- Alti-IP 600 Phone Configuration
- Application Extension Configuration
- System Data Management
- System Report Management
- Data and Internet Integration
- AltiWeb
- Using TAPI
- Tools
- Basic Call Router & Call Router Advanced
- Call Accounting Report Formats
- E1 R2 CAS Installation
- Product Repair Services & Technical Support
- Glossary
- Index
- Readers Comment Form

Huntgroup Configuration
AltiContact Manager Administration Manual 14-19
14. Huntgroup
Configuration
Forwarding All Calls
Call Forwarding is available to huntgroups.
This is the Call Forwarding feature that is also accessible by the agent
extension user by dialing #36.
A One Hop Limit to Call Forwarding for a Transferred Call
There is a one hop limit to call forwarding when the call that is being passed
is a transferred call. For example, agent extension 100 receives a
transferred call and forwards this call to agent extension 101; agent
extension 101 is set to forward all calls to agent extension 102; agent
extension 102 receives the call but CANNOT forward this call to another
agent extension.
A 10-Hop Limit to Call Forwarding for Direct Calls
For direct calls, there is a “10-hop” limit to call forwarding. For example,
agent extension 100 forwards to agent extension 101, 101 forwards to 102,
102 forwards to 103, and etc. through agent extension 120. A call to agent
extension 100 will be forwarded to 101, which will forward to 102, which
will forward to 103, and etc. until the call has been forwarded 10 times. At
this point, the call will not be forwarded again; if the last agent extension
in the forwarding chain does not answer, the call is sent to agent extension
100’s voice mail.
If there is a loop condition in the forwarding chain (for example, 100
forwards to 101, 101 to 102, and 102 back to 100), the call is sent to the first
destination’s voice mail.
To enable call forwarding, select the Enable Forward to check box, then,
using the drop-down list, indicate the forwarding destination. You can use
Apply to… to act on multiple extensions, with the restrictions discussed in
the previous section. The forwarding options are as follows:
•ToVoice Mail
•ToIVR—select the IVR number to use in the drop-down list under the
option. IVR settings are established in IVR… in the Call Center
Management menu.
•ToanExtension—select an extension from the drop-down list.
•ToaGroup—select a group from the drop-down list.