Specifications

AltiView Manual 19
Using AltiView
Dialing Speed Dial Numbers
You can use either your own Station Speed Dial numbers or the System
Speed Dial numbers.
See Chapter 4, Configuring Your Station Settings for details on setting up
speed dial numbers.
1. Depending on which type of speed dial number you want to call, click
the Station Dial tab or the System Dial tab.
2. Choose the speed dial entry from the list.
3. Click the Dial button to place the call.
Redialing
To redial the last number called, click the Redial button.
Placing Calls on Hold
During a phone call, click the Hold button in the AltiView main window.
The state of the call is changed from connected to a hold state and you will
hear the dial tone.
In the row displaying the call, the State column shows the call on hold.
Click the Hold state cell to release the hold and reconnect the call.
Note: When a call is put on hold using the Hold button in AltiView, if the
user does not pick up the call after the two-minute hold time, the
system will ring the user. If the call is still on hold after two
minutes, the system will ring the user again.
Using Call Waiting
During a call, you may hear a beep indicating that you have another
incoming call. To answer the call:
1. Click the Calls tab on the AltiView main window to view the directory
of current calls.
2. Find and click the row displaying the incoming call.
This places the current call on hold and connects the incoming call.