User guide
Table Of Contents
- About This Manual
- Overview
- Technology Enhancements in Release 5.1
- SIP Implementation
- Multi-Site Enterprise Management - AltiEnterprise Manager
- Multi-Chassis Gateway Support (ACM only)
- Capacity Improvements
- Voice Processing New Features and Enhancements
- PBX New Features and Enhancements
- Call Center New Features and Enhancements
- Client Application New Features and Enhancements
- IP Phone New Features and Enhancements (IP600, IP710, IP705)
- Key System Features
- Technology Enhancements in Release 5.1
- Software Installation & License Registration
- Getting Around AltiWare Administrator 5.1
- System Configuration
- Setting General Parameters
- Setting a System Number Plan
- Setting Business Hours
- Routing Calls on Holidays
- Configuring System Speed Dialing
- Defining System Call Restrictions
- Creating Account Codes
- Setting up Call Reports
- Country-Relevant Settings
- Audio Peripheral Configuration
- Activity
- Feature Profiles
- CT-Bus Configurations
- Voice Mail Configuration
- Auto Attendant Configuration
- Board Configuration
- Using the Triton Resource Board
- Using the Triton MeetMe Conference Board
- Configuring the Quantum Board
- Configuring the Triton Analog Station Board
- Configuring the Triton Analog Trunk LS/GS and LS Boards
- Configuring the Triton VoIP Board
- Configuring the Triton T1/E1 Board
- Configuring Virtual Boards SIPSP and H323SP
- Configuring the MAX Board
- Configuring the Virtual MobileExt Board
- Trunk Configuration
- Trunks Out of Service
- Channel Identification
- Opening the Trunk Configuration Window
- Selecting Trunks to Set Attributes
- Configuring One or Multiple Trunks
- Setting General Trunk Attributes
- H323 Tie Trunk Properties
- SIP Tie Trunk Properties
- SIP Trunk Properties
- Triton T1/E1 Trunk Properties
- Triton Analog Trunk GS/LS Properties
- Quantum Trunk Properties
- Incoming Call Routing
- Outgoing Call Blocking
- In Call Routing Configuration
- Out Call Routing Configuration
- Extension Configuration
- Setting Up IP Extensions
- AltiGen IP Phone Configuration
- Mobile Extension Configuration
- Hunt Group Configuration
- Paging Group Configuration
- Line Park Configuration
- Workgroup Configuration
- Managing and Using MeetMe Conference
- Network Configuration Guidelines for VoIP
- Enterprise VoIP Network Management
- Understanding VoIP Bandwidth Requirements
- Opening AltiEnterprise Manager
- Setting VoIP Codec Profiles
- Assigning Codec Profiles to IP Addresses
- Defining IP Networks
- Defining the IP Dialing Table
- The Multi-site VoIP Domain
- Working with Servers in the VoIP Domain
- Managing VoIP Domain Users
- Configuring Global Least Cost Routing
- When Information May Be Out of Sync
- System Report Management
- Tools and Applications
- E1-R2 and E1 ISDN PRI Installations
- Required Service Parameters
- Network Ports
- Technical Support & Product Repair Services
- Troubleshooting
- Index
Chapter 21: Enterprise VoIP Network Management
AltiWare ACC 5.1 Administration Manual 275
Configuration Buttons
• Servers button displays the VoIP domain name, servers in the system, and server
ID length. Lets you add/remove servers and change the VoIP domain master.
Displays the configuration and informational tabs listed in the next section.
• Codec button lets you configure individual codec profiles—silence suppression,
codec, jitter buffer range, RTP packet length, DTMF delivery, and enable/disable SIP
early media.
• User button displays information about extensions in the VoIP domain and lets you
change an extension to global or local and relocate an extension.
• Global LCR button lets you add E.164 number patterns and specify source and
target sites.
Tabs Displayed with the Servers Button
• Information tab displays information about the selected site.
• IP Networks tab defines IP networks and the bandwidth information for an AltiWare
site. Bandwidth usage control for Internet and intranet can be set up here. If the
bandwidth usage exceeds the maximum setting, the call will not be established.
• IP Dialing Table tab defines the IP dialing table for an AltiWare site. Specified
information here includes a codec profile and a protocol (SIP or H323) for the
communication from this site to the selected site.
• IP Codec tab lets you specify an inter-gateway codec and define IP device ranges
to which you can assign a codec profile.
• Number Plan tab displays the number plan information that is set up in AltiWare
Administrator, System Configuration window, Number Plan tab.
Changing the AltiEnterprise Manager Password
Only a person with DomainAdmin rights can change the AltiEnterprise Manager
password. To change the password, click the Password button at the top of the
AltiEnterprise Manager window. The following dialog box opens:
Enter the old password, and the new password. Confirm the password, and click OK.
Setting VoIP Codec Profiles
The codec setting in AltiWare 5.1 is profile-based. For different IP addresses and
protocols, a different preferred codec can be used. Each codec profile can have its own
codec (G.711, G.723, G.729), packet length, and jitter buffer. The codec profile can be
assigned to connectivity with a remote server, IP phone or other VoIP device.