User guide

Setting Parameters
MAXCS ACM 6.5 Administration Manual 77
• Add and delete a gateway
• Attach and detach a gateway
• Change a gateway name, IP address, password, country
• Enable Media Server on the Softswitch
• Set TDM Bus mode for a gateway
• Set CT-Bus clock for a gateway
To open the Softswitch Component Configuration window, select
System > Softswitch Component Management.
Figure 4. Softswitch Component Configuration window, Media Server/Gateway tab
Setting Parameters
To read or set parameters for a specific gateway, first select the gateway in the list on
the left. After making changes to a gateway, click Apply before selecting another
gateway. When you are finished with the window, click OK.
Parameter Description
ID/Name/Type Lists all gateways that have been added using
the Add button in this window.
Status Shows the status of the selected gateway:
active, disconnected, initializing, resetting,
failed. (Read-only field.)