User guide

Chapter 28: Microsoft Exchange Integration
MAXCS ACM 6.5 Administration Manual 411
3. Enter the user’s MAXCS extension number in the Manually entered mailbox
extension field (make sure the extension number is the same in MaxAdmin and the
Exchange User Mailbox).
4. Select PIN setting(s), and click Next. (If you select Automatically Generate, the
Exchange Server will send the user an e-mail with the PIN.)
5. Click Enable.
6. Repeat steps 1-5 for each user you want to enable.
Configuring for Out Calling from UM
This section shows how to enable extensions integrated with Exchange 2007 in Native
or Bridged mode to
• Call a personal contact or a contact from the database
• Return a call from Exchange 2007 voice mail
Note: Unlike with AltiGen’s Zoomerang feature, a user calling out from voice mail
cannot go back to the Exchange voice mailbox after returning the call.
Configure the following in Microsoft Exchange 2007.
1. Check Allow outgoing calls through this UM IP gateway:
Figure 15. Allowing outgoing calls through the UM IP gateway