User guide

Configuring the AltiGen IP Phone
MAXCS ACM 6.5 Administration Manual 239
Configuring Programmable Keys and Workgroup Status
After setting parameters on the General tab, go to the tab that corresponds to the
phone type, and configure the programmable keys (plus the Display Workgroup
Status field on the Alti-IP 600 and IP 705 phones). Programmable key settings are
described in the next table.
Figure 2. IP Phone Configuration window, IP 710 tab
Note: The Copy From button allows you to copy Programmable Key settings from one
IP phone extension to another. No other settings are carried over.