User guide

Configuring the Triton T1/E1 Board
MAXCS ACM 6.5 Administration Manual 159
Figure 11. E1 PRI Protocol Configuration dialog box (top half)
Figure 12. E1 CAS Protocol Configuration dialog box (top half)
Selecting Span Types
• E1 CAS—select this option to associate all channels on the span to E1 channel
associated signaling.
• Regular ISDN PRI—select this option to indicate 30B+D ISDN PRI span and to
designate the 16th channel as the D channel.
• Enable Tie Trunk—check this box to enable a tie trunk. Tie trunks must terminate
to a system also configured as a tie trunk.
Note: This option not available when T1 CAS is selected.