User guide

Configuring the Triton T1/E1 Board
158 MAXCS ACM 6.5 Administration Manual
Figure 9. T1 PRI Protocol Configuration dialog box (top half)
Figure 10. T1 CAS Protocol Configuration dialog box (top half)
Selecting Span Types
• T1 CAS—select this option to associate all channels on the span to T1 CAS.
• Regular ISDN PRI—select this option to indicate 23B+D ISDN PRI span and to
designate the last channel as the D channel.
• Enable Tie Trunk—check this box to enable a tie trunk. Tie trunks must terminate
to a system also configured as a tie trunk.
Note: This option not available when E1 CAS is selected.