User guide

SIP Tie Trunk Properties
132 MAXCS ACM 6.5 Administration Manual
Carrier can only
accept Calling
Number with
minimum x digits
Enter the number of digits, then enter a calling number in the
field below the table in case the carrier cannot accept
configured numbers.
Carrier can only
accept assigned
numbers as Calling
Number
If you select the this option, specify “assigned numbers” by
clicking the Add button and entering the numbers. To edit or
delete a number you added, select it and click the Edit or Del
button. Enter a calling number in the field below the table in
case the carrier cannot accept configured numbers.
Send Caller Name
Check to also send the caller name to callees.
Enable Standard
Record-Route Header
Check this box if the SIP service provider uses SIP Record-
Route and the SIP trunk cannot make or receive calls. If it
already works, DO NOT CHECK or UNCHECK this box. [Service
provider Bandwidth.com with Edgewater Route require this
checked]
Incoming DID
Number Field
When a call comes in, the SIP trunk uses To Header or
Request URI as the DID/DNIS number
Field Description