User guide

AltiServ User Guide 35
Voice Mail
Creating a Distribution List
After pressing 4 at the Main Menu to hear the Personal Options menu, press
7 to access the Distribution Lists menu, then…
1. Press 1 to Add a distribution list.
2. When prompted, enter a 2-digit number to identify the list.
3. When prompted, enter the list members, which can be one of the
following forms:
• Extension numbers.
• 01,followedbyaPersonal Distribution List number.
• 02,followedbyaSystem Distribution List number.
4. The system reads back the entry to you, and you press # to save or * to
cancel the entry.
5. Repeat the previous two steps until you’ve added all the list members.
Editing a Distribution List
To add or remove list members, after pressing 4 at the Main Menu to hear
the Personal Options menu, press 7 to access the Distribution Lists menu,
then…
1. Press 3 to Modify a distribution list.
2. When prompted, enter a 2-digit number to identify the list.
3. When prompted, do one of the following:
•Toadd members, press 1,thenfollowsteps3and4inthe
immediately preceding procedure, Creating a Distribution List.
•Todelete members, press 2. When prompted, enter the member
number you want to delete. For extensions, enter the extension
number. Use 01 or 02, followed by the list number, to specify
system or personal distribution lists, respectively.
4. The system reads back the entry to you, and you press # to save or * to
cancel the action.
5. If you just added a member, you’re prompted to add another. If you
just deleted a member, you’re asked if you want to delete another.